View RM04BBN61R9_3861202.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

no trm-xx0s001j ta-i thick film chip resistors ( lead ? free for rm series standard ) page 1/13 ta-i technology co., ltd ceramic substrate 1. scope : this specification applies for the rm series of thick film chip resistors made by ta-i. 2. construction: 3. type designation: rm 10 j tn 103 product code size tolerance packaging nominal rm : chip resistor power rating resistance over coat ni plating conductor : (lead-free or with lead ) sn plating resistive element special l : 06 ? 2mm pitch paper tape +n: lead-free 02-0201(0603) 1/20w 04-0402(1005) 1/16w 06-0603(1608) 1/10w 10-0805(2012) 1/8w 12-1206(3216) 1/4w 13-1210(3226) 1/3w 20-2010(5025) 1/2w 25-2512(6432) 1 w j- 5% g- 2% f- 1% d- 0.5% b- 0.1% t-paper tape e-embossed tape b-bulk cassette 3 digits, e.g.,: (e-24) 103 = 10 3 = 10k 0 = 0 4 digits, e.g., : (e-96) 1540 = 154 43r2 = 43.2
no trm-xx0s001j ta-i thick film chip resistors ( lead ? free for rm series standard ) page 2/13 ta-i technology co., ltd 4. dimensions: unit: mm type l w c d t rm02 0.600.03 0.30 0.03 0.1 0.05 0.15 0.05 0.25 0.05 rm04 +0.1 1.00 -0.05 0.50 0.05 0.20 0.10 0.25 0.10 0.35 0.05 rm06 1.60 0.10 0.80 0.10 0.30 0.20 +0.2 0.30 -0.1 0.45 0.10 rm10 2.00 0.10 1.25 0.10 0.40 0.20 0.40 0.20 0.50 0.10 rm12 3.10 0.10 1.55 0.10 0.50 0.30 0.40 0.20 0.60 0.10 rm13 3.10 0.10 2.55 0.10 0.50 0.30 0.40 0.20 0.60 0.10 rm20 5.00 0.15 2.50 0.15 0.60 0.30 0.50 0.25 0.60 0.10 rm25 6.30 0.20 3.20 0.20 0.60 0.30 0.50 0.25 0.60 0.10
no trm-xx0s001j ta-i thick film chip resistors ( lead ? free for rm series standard ) page 3/13 ta-i technology co., ltd 5. ratings & characteristics : resistance range( ) type power rating at 70 rating voltage max. working voltage max. over- load voltage t.c.r (ppm/ ) b( 0.1%) e-96 d( 0.5%) e-96 f( 1%) e-96 g( 2%) e-24 j( 5%) e-24 rm02 1/20w refer 5.2 25v 50v 200 10 -1m 10 -1m 10 -10m 200 10 -200k 10 -1m 10 -10m 10 -10m 10 -10m rm04 1/16w refer 5.2 50v 100v +500 -200 1 -9.1 1 -9.1 1-9.1 100 10 -560k 10 -1m 10 -1m 200 1m no trm-xx0s001j ta-i thick film chip resistors ( lead ? free for rm series standard ) page 4/13 ta-i technology co., ltd 5.1 derating curve : for resistors operated at am bient temperature over 70 , power rating shall be derated in accordance with figure 1. p max. 100 power ratio ( % ) 50 0 -55 50 70 100 125 ambient temp. ( c ) figure 1 5.2 rated voltage: the rated voltage is calculated by the following formula: e = p * r e= rated voltage(v) p= rated power(w) r= resistance value ( ) e.g. : what is rm06jtn102 the rated voltage ? rm06jtn102 p:1/10w ; r:102 = 1k = 1000 e = 0.1(w) * 1000( ) = 10 (v)
no trm-xx0s001j ta-i thick film chip resistors ( lead ? free for rm series standard ) page 5/13 ta-i technology co., ltd 6.reliability tests: (as specified in jis c 5202) test items reference standard condition of test test limits temperature coefficient of resistance jis-c5202-5.2 +25 ? +125 refer 5.0 short time overload jis-c5202-5.5 2.5 x rated voltage for 5 sec (1% + 0.05 ) remarks : 0201 : (3% + 0.1 ) 0402 : (2% + 0.1 ) 0 : 50m or les s intermittent overload jis-c5202-5.8 3.0 x rated voltage or max overloading voltage ,1sec ?on? , 25sec ?off? , 10000 cycles (remarks : 0201 / 0402 2.5 x rcwv * ) (5.0% + 0.1 ) 0 : 50m or less load life jis-c5202-7.10 1000 hours at rated voltage, 70 , 1.5hours ?on ?, 0.5hour ?off? 0.5%,1%: (1.0%+0.05 ) 2%,5%: (3.0%+0.1 ) remarks : 0201 : (5.0%+0.1 ) 0402 : (3.0%+0.1 ) 0 : 100m or less load life with humidity jis-c5202-7.9 1000 hours at rated voltage , 40 2 , 90~95% rh 1.5hours ?on ?, 0.5hour ?off? 0.5%,1%: (1.0%+0.05 ) 2%, 5%: (3.0%+0.1 ) remarks : 0201: (5.0%+0.1 ) 0402: (3.0%+0.1 ) 0 : 100m or less without mechanical damage rapid change of temperature jis-c5202-7.4 -55 (30 min. ) / +155 (30 min. ) 5 cycles 0.5%,1%: (0.5%+0.05 ) 2%, 5%: (1.0%+0.05 ) remarks : 0201: (3.0%+0.1 ) 0 : 50m or less solderability jis-c5202-6.11 245 5 solder, 2 0.5 sec dwell. solder : sn96.5 / ag3.0 / cu0.5 at least 95% of surface area of electrode shall be covered with new solder. robustness of termination (bending) jis-c5202?6.1 3mm deflection 0.5%,1%: (0.5%+0.05 ) 2%,5%: (1.0%+0.05 ) remarks : 0201 (1.0%+0.1 ) 0 : 50m or less dielectric withstanding voltage (voltage proof) jis-c5202-5.7 applying voltage : 0201 : 50v , 0402 & 0603 : 300v the other 500v for a minute . no abnormalities such as flashover, burning dielectric breakdown shall appear. insulation resistance jis-c5202-5.6 applying voltage 100v for 1 minute. remark : 0201 50v R 1g resistance to dry heat jis-c5202-7.2 125 5 for 96 4hrs 0.5%,1%: (1.0%+0.05 ) 2%,5%: (2.0%+0.1 ) remark 0201 : (2.0%+0.1 ) 0 : 50m or less resistance to solder heat jis-c5202-6.10 270 5 solder , 10 1 sec dwell . 0.5%,1%: (0.5%+0.05 ) 2%, 5%: (1.0%+0.05 ) remarks : 0201 (3.0%+0.1 ) 0 : 50m or less
no trm-xx0s001j ta-i thick film chip resistors ( lead ? free for rm series standard ) page 6/13 ta-i technology co., ltd note* : rcwv : rated continuous working voltage . 7. marking 7.1 2% & 5%(e24) resistance value is expressed by 3 digi ts, the first two di gits represent the significant figures of nominal resistance value in , and the third digit represents exponent for base of 10. e.g. :, 472 = 47 10 2 = 4700 = 4.7k 7.2 1% (e96 ) resistance value is expressed by 4 digits or 3digits , the first three digits represent the significant figures of nominal resistance value in , and the fourth digit represents exponent for base of 10. e.g. : 4701 = 470 10 1 = 4700 = 4.7k whisker sony ss-00254-8 component , lead-free soldering part 8 : solder heat resistance test for smd. lead- free soldering ? temp. cycles : -35 5 / 125 5 , keep 7 min testing duration : 500 4 hours temp. humidity chambers: temperature : 85 humidity : 85% rh testing duration : 500 4 hours . whisker formation : 50 um or less . resistance to solder heat sony ss-00254-5 component , lead-free soldering part 5 : solder heat resistance test for smd. lead- free soldering ? flow solder : pre ? heat : 100 to 105 30 5 sec temperature : 260 3 10 +1/ -0 sec the entire sample shall be dipped in solder. the specimen shall be stored at standard atmospheric conditions for 1 hour . iron solder : bit temperature : 350 10 application time of soldering iron : 3 +1/- 0sec apply the soldering iron to the electrode . the specimen shall be stored at standard atmospheric conditions for 1 hour , after which the measurements shall be made electrical characteristics shall be satisfied . without distinct deformation in appearance
no trm-xx0s001j ta-i thick film chip resistors ( lead ? free for rm series standard ) page 7/13 ta-i technology co., ltd 7.3 1%(rm06/e96) when the marking space is too small in su ch small-sized resistors as rm06, the marking can not made by 4 digits and may be made by two digits combined with one english capital. symbol for e96 series nominal resistance value symbol e96 symbol e96 symbol e96 symbol e96 01 100 25 178 49 316 73 562 02 102 26 182 50 324 74 576 03 105 27 187 51 332 75 590 04 107 28 191 52 340 76 604 05 110 29 196 53 348 77 619 06 113 30 200 54 357 78 634 07 115 31 205 55 365 79 649 08 118 32 210 56 374 80 665 09 121 33 215 57 383 81 681 10 124 34 221 58 392 82 698 11 127 35 226 59 402 83 715 12 130 36 232 60 412 84 732 13 133 37 237 61 422 85 750 14 137 38 243 62 432 86 768 15 140 39 249 63 442 87 787 16 143 40 255 64 453 88 806 17 147 41 261 65 464 89 825 18 150 42 267 66 475 90 845 19 154 43 274 67 487 91 866 20 158 44 280 68 499 92 887 21 162 45 287 69 511 93 909 22 165 46 294 70 523 94 931 23 169 47 301 71 536 95 953 24 174 48 309 72 549 96 976 symbol for multipliers symbol a b c d e f g h x y z multipliers 10 0 10 1 10 2 10 3 10 4 10 5 10 6 10 7 10 -1 10 -2 10 -3 e.g : 02c = 102 10 2 = 10.2k notes : when the resistance value is not in the list of e96 , 3 digitals with underline in e-24 series is used as mark . e.g. : 0603 , 120 , 1% marking is 121 7.4 1%( e96/3digitals) the resistance value by 3 digits is requirement for customer. 7.5 no marking for rm04
no trm-xx0s001j ta-i thick film chip resistors ( lead ? free for rm series standard ) page 8/13 ta-i technology co., ltd 8. taping & reel : 8.1 taping dimensions 8.1.1 4 mm pitch paper: packing type a b w f e p 1 p 2 p 0 d 0 t rm06 1.1 0.1 1.9 0.1 0.64 0.1 rm10 1.6 0.15 2.4 0.2 rm12 2.0 0.15 3.6 0.2 paper rm13 2.8 0.2 3.6 0.2 8.0 0.2 3.5 0.05 1.75 0.1 4.0 0.1 2.0 0.05 4.0 0.1 +0.1 1.5 -0 0.84 0.1 8.1.2 2 mm pitch paper : packing type a b w f e p 1 p 2 p 0 d 0 t rm02 0.37 0.05 0.67 0.1 2.0 0.1 2.0 0.05 0.37 0.1 rm04 0.7 0.05 1.2 0.05 2.0 0.1 2.0 0.1 0.45 0.1 paper rm06 1.1 0.1 1.9 0.1 8.0 0.2 3.5 0.05 1.75 0.1 2.0 0.1 2.0 0.1 4.0 0.1 +0.1 1.5 -0 0.64 0.1 8.1.3 4 mm pitch emboss : packing type a b w f e p 1 p 2 p 0 d 0 t rm20 2.8 0.2 5.3 0.2 emboss rm25 3.6 0.2 6.9 0.2 12.0 0.2 5.5 0.05 1.75 0.1 4.0 0.1 2.0 0.05 4.0 0.05 +0.1 1.5 -0 0.85 0.15
no trm-xx0s001j ta-i thick film chip resistors ( lead ? free for rm series standard ) page 9/13 ta-i technology co., ltd 8.14. bulk case specifications: unit: mm paper tape 4 mm pitch 2 mm pitch package type size 180mm/r 250mm/r 180mm/r 250mm/r emboss plastic tape 4 mm pitch bulk rm 02 10000 rm 04 10000 20000 50000 rm 06 5000 10000 10000 20000 20000 rm 10 5000 10000 10000 rm 12 5000 10000 5000 rm 13 5000 rm 20 4000 rm 25 4000 8.2 reel specifications: unit: mm type a b c w t rm02 /04 / 06 rm10 /12 /13 9.0 1.0 11.5 1.0 rm20 / 25 178.0 1.0 60.0 1.0 13.0 1.0 13.0 1.0 15.5 1.0
no trm-xx0s001j ta-i thick film chip resistors ( lead ? free for rm series standard ) page 10/13 ta-i technology co., ltd 8.3. peel ?off force : peel ?off force of paper and blis ter tape is in accordance with ?jis-c5202 ? that is , 0.1 to 0.7 n at a peel-off speed of 300 mm / minute. pull top cover tape 300 mm/min 10 ? 15 standard: 0.1 ~ 0.7 n carrier tape 9. label : 9.1 manufacture label : date code resistance tolerance type lot no: 9.2 customer label: lead-free products product spec. customer no: date year month qty: 5000 pcs 102 j 0086166k- 0008 0603 ta-i tech lead free 0603 5%(t) 1k 105a702723 rm06jtn102 04.05.21
no trm-xx0s001j ta-i thick film chip resistors ( lead ? free for rm series standard ) page 11/13 ta-i technology co., ltd 10. recommended land patterns : dimension ( mm ) land pattern type size a b c rm 02 (0201 ) 0.25~0.3 0.7~0.9 0.3~0.4 rm 04 (0402 ) 0.50~0.6 1.4~1.6 0.4~0.6 rm 06 (0603 ) 0.7~0.9 2.0~2.2 0.8~1.0 rm 10 (0805 ) 1.0~1.4 3.2~3.8 0.9~1.4 rm 12 (1206 ) 2.0~2.4 4.4~5.0 1.2~1.8 rm 13 (1210 ) 2.0~2.4 4.4~5.0 2.3~3.5 rm 20 (2010 ) 3.3~3.7 5.7~6.5 2.3~3.5 rm 25 (2512 ) 3.6~4.0 7.6~8.6 2.3~3.5 11. recommend ir ? reflow profile : (solder : sn96.5 / ag3 / cu0.5) peak : 250 0 5 ? + , 5 sec pre ? heat zone : 150 to 180 , 90 30 sec soldering zone : 230 or higher , 30 10 sec
no trm-xx0s001j ta-i thick film chip resistors ( lead ? free for rm series standard ) page 12/13 ta-i technology co., ltd 12. storage conditions: temperature: 5 ~35 ,humidity:40%~75% 13. shelf life: 2 years from manufacturing date. 14. ecn : engineering change notice: the customer will be informed with ecn if there is significant modification on the characteristics and materials described in approval sheet. 15. manufacturing country & city : ta-i technology co., ltd. ( taiwan? tao yuan ) tel: 886-3-3246169 fax : 886-3-3246167 associated companies : (1) fortune task resistor factory ( china ? dongguan ) tel : 86-769-8339-4790 ? 3 fax : 86-769-8339-4794 (2) ta-i technology (dongguan ) co., ltd. ( china ?dongguan ) tel : 86-769-8339-4790 ? 3 fax : 86-769-8339-4794 (3) ta-i technology ( su zhou ) co., ltd. ( china ? su zhou) tel :86- 512-63457879 fax : 86-512-63457869 (4) tai ohm electronics ( m ) sdn. bhd. ( malaysia ? pulaupinang ) tel :604- 3900480 fax : 604-3901481 (5) p.t.tai electronics indonesia ( indonesia ? jakarta ) tel :002-62-21-44820254 fax : 002-62-21-44820256
no trm-xx0s001j ta-i thick film chip resistors ( lead ? free for rm series standard ) page 13/13 ta-i technology co., ltd revise record date content owner 2005/11/25 4. ratings & characteristics : adding rating voltage hank liu 2005/12/12 6.reliability tests short time overload : add 0402 & 0201 intermittent overload : add 0402 & 0201 load life : add 0402 & 0201 load life with humidity : add 0402 & 0201 rapid change of temperature: add 0402 & 0201 robustness of termination : add 0402 & 0201 dielectric withstanding voltage (voltage proof) : add 0402 & 0201 insulation resistance : add 0402 & 0201 resistance to dry heat : add 0402 & 0201 resistance to solder heat : add 0402 & 0201 hank liu 2006/03/15 1.adding resistance range for 1% 0603 ? 2512 size from 1m to 10 m . vincent 2006/05/11 2. adding resistance range for 1%,2% 0402 size from 1m to 10 m . vincent 2006/05/22 1.adding metric system for product size. 2. construction: conductor: new add : lead-free material (original :with lead material) vincent 2006/06/09 2. adding resistance range : 0402 size : adding 0.1% : from 10 to 200 k . adding 0.5% : from 10 to 1 m . 0603-2512 size : 0.1% , 0.5% : before :from 56 to 560k . after : from 10 to 1 m . adding 5% :10m to 20m . vincent

▲Up To Search▲

Price & Availability of RM04BBN61R9

	To Download RM04BBN61R9 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .